| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Rudder pin question. http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=36063 |
Page 1 of 1 |
| Author: | dukesguy [ Tue Jun 07, 2011 10:21 am ] |
| Post subject: | Rudder pin question. |
I have a 1977 H 16. There is a lot of slop at the rudder casting/ rudder pin area. My pins will come out and are not worn down very much. Non adjustable rudder castings. What are my options? Is there a 7/16 inch pin available? Otherwise is in good shape for the age. |
|
| Author: | MBounds [ Tue Jun 07, 2011 12:11 pm ] |
| Post subject: | Re: Rudder pin question. |
http://www.w1dm.com/projects/HOTLINE/10-09-12%20HOTLINE.pdf page 10 |
|
| Author: | sunjammers [ Tue Jun 07, 2011 6:16 pm ] |
| Post subject: | Re: Rudder pin question. |
GREAT ARTICLE! Just one other reason to join the Hobie class! Join today if your not already a member! http://www.hcanamembers.com/ |
|
| Author: | waldorf [ Tue Jun 07, 2011 8:06 pm ] |
| Post subject: | Re: Rudder pin question. |
we replaced my rudder Gudgeons and pins... made a great difference in overall handling... in my opinion worth it It takes a bit of work to put the new one piece (european models) on the old hobies like mine... you have to widen the holes in the aluminum .... and have patience... take a look at this thread... good luck... viewtopic.php?f=14&t=26309&p=109417&hilit=Gudgeons#p109417 |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|