| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Aussie Halyard tie-off http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=36775 |
Page 1 of 1 |
| Author: | jsloan999 [ Thu Jul 14, 2011 1:16 pm ] |
| Post subject: | Aussie Halyard tie-off |
I have a 2008 H16 that came with the aussie rig. On my mast, the cheek block is centered on the front of the mast directly below the jib halyard cleat. After hoisting the jib, and pulling the mast forward, should I run the halyard down and around the cheek block before tie off at the cleat or just tie to cleat? |
|
| Author: | MBounds [ Thu Jul 14, 2011 1:50 pm ] |
| Post subject: | Re: Aussie Halyard tie-off |
Go around the block. |
|
| Author: | 56kz2slow [ Thu Jul 14, 2011 4:21 pm ] |
| Post subject: | Re: Aussie Halyard tie-off |
I trust you Matt, I just want to understand why around the block first? |
|
| Author: | MBounds [ Thu Jul 14, 2011 4:35 pm ] |
| Post subject: | Re: Aussie Halyard tie-off |
Just easier to adjust. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|