It's too viscous for delam repair.
Quote:
Six10® Thickened Epoxy Adhesive
Not to mention - it's almost twice as expensive as Git-Rot
In the 16 oz size, Git-Rot is $1.91/oz
Six-10 is $3.47/oz
(a tube is of Six-10 is 190 ml - that's only 4.425 oz)
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| West Six10 For Hull Delam ? http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=41098 |
Page 1 of 1 |
| Author: | irvbob123 [ Sat Feb 04, 2012 10:06 am ] |
| Post subject: | West Six10 For Hull Delam ? |
Just wonder if anyone has tried it? Looks like it's a new product. Comes in a Big Tube and mixes as you squeeze a regular caulk gun trigger. $20. per tube seems cheap for the H-16 delam I have to do this Spring. This dispenses hardener and resin at the tip. Wonder if it's cheaper and easier than GitRot? GitRot does (or does not) needs mixing and adding to a dispenser? http://www.westsystem.com/ss/new-six10-epoxy-adhesive/ |
|
| Author: | MBounds [ Sat Feb 04, 2012 5:17 pm ] |
| Post subject: | Re: West Six10 For Hull Delam ? |
It's too viscous for delam repair. Quote: Six10® Thickened Epoxy Adhesive Not to mention - it's almost twice as expensive as Git-Rot In the 16 oz size, Git-Rot is $1.91/oz Six-10 is $3.47/oz (a tube is of Six-10 is 190 ml - that's only 4.425 oz) |
|
| Author: | irvbob123 [ Sat Feb 04, 2012 8:22 pm ] |
| Post subject: | Re: West Six10 For Hull Delam ? |
Oh ! Git Rot it is. Seems like enough good stuff has been said about it. THANKS !!!!! |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|