| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Abandoned Hobie 16s http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=4286 |
Page 1 of 1 |
| Author: | jskeeton [ Sat Jul 22, 2006 4:28 pm ] |
| Post subject: | Abandoned Hobie 16s |
was looking around a local marina today and stumbled across a 1977 Hobie 16. The owner is also the marina owner and said I could have the 1977, a 1973 and a very worn old trailer for $400.00 Hmm, I'm considering restoration but would like your comments--especially if you are familiar with delaminations and what they look like, feel like. The 1973 has a bent mast and no steering gear, much less shrouds, sails, shrouds, stays, lines, boom or blocks. The 1977 has an okay mast, otherwise the same conditions exist. The trailer? Well, yuck---Steve |
|
| Author: | Skipshot [ Sat Jul 22, 2006 10:18 pm ] |
| Post subject: | |
How much time do you have? Do you want to buy work? |
|
| Author: | jskeeton [ Sun Jul 23, 2006 5:21 am ] |
| Post subject: | |
Time is okay--like most everyone else. I work a full time job but have ample time off. And, I don't mind the work because I wanted to build experience. Besides, I enjoy working with my hands. I just don't want a foolish expensive project that will sour me on the whole experience. |
|
| Author: | yoh [ Sun Jul 23, 2006 6:31 am ] |
| Post subject: | |
Let me start this way... Are you carzy? Check out how much it would cost to buy a set of sails, standing and running rig, the whole rudder system, probabely a trampolin. It sounds like the hulls are soft because you already asked for delamination fix info. I assume those boats were abandoned by their owners after they realized that the repairs would have exceeded the cost of a replacement. In some states it will be almost impossibe to obtain a title for those boats to finally register them. You can take them for free to salvage parts - but do not pay the guy You can get a usable Hobie 16 for less them $1000. I bought my Hobie ('85) with some upgrades installed (Harken main sheet system, double trap, composite blades, and hotstick) for $700. I needed to replace all lines and shrouds befor the first sail and the tramp after the first season. Patrick |
|
| Author: | buzzman2 [ Sun Jul 23, 2006 11:00 am ] |
| Post subject: | |
That would require some serious thought even if the guy was giving it to you for free. Run! By the time you get that thing ready for the water you would have found a handful of boats worth buying. Spend your time looking, not fixing. Just my two cents. Yoh is right, you can spend 500-1000 bucks for a good used 16. They're out there. |
|
| Author: | jskeeton [ Sun Jul 23, 2006 7:32 pm ] |
| Post subject: | |
Thats why I posted on this site, to find out if someone out there tried it or considered trying it--answer seems to be no. So, I'll pass. BTW, the hulls are solid to the feel and didn't have soft spots--go figure. |
|
| Author: | hobiecat@opera [ Sun Jul 23, 2006 9:00 pm ] |
| Post subject: | |
I have seen many boats that old still sailing. Does it take on a lot of water? What type of sailing do you want to do? Racing, than pass, get out on the water and have fun with the family, it could be worth it. Is the trailer functional, and just needs a little elbow grease, how often will you need to use the trailer, check out the prices of trailers, they are not cheap. |
|
| Author: | Banzilla [ Mon Jul 24, 2006 8:23 am ] |
| Post subject: | |
If the hulls are truly solid and the Mast is in better than fair shape, offer $250.00 and you have some good replacement parts. But you may be better off finding a "Whole boat and trailer" for $700 - $1000 soooo many options sooooo little time. DO NOT tell him a good used mast may go for around $600. |
|
| Author: | jskeeton [ Mon Jul 24, 2006 4:45 pm ] |
| Post subject: | |
Yeah, I did some on-line research and the basics that are needed, mast, boom, rudders tilt the price to over 1K. That is just for hardware. I'd still have to sand badly chalked hulls and go back over those with Imron or some sort of epoxy. Now I'm beginning to realize why they are there. It sort of goes along with the free boats in the Wooden Boat magazine. I think I'll pass on the project. |
|
| Author: | t page [ Mon Jul 24, 2006 5:53 pm ] |
| Post subject: | |
great idea and good decision |
|
| Author: | jskeeton [ Tue Jul 25, 2006 3:37 pm ] |
| Post subject: | |
Thanks for all the replies--see you down the road, Steve |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|