You can replace the jib blocks with anything you want.
Most racers use Harken micro blocks, not the Carbos.
They are attached to minimize the stack-up on the front crossbar:
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Harken Carbo 29mm blocks for jib and cheek?? http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=4372 |
Page 1 of 1 |
| Author: | ALEXSAILS [ Sun Jul 30, 2006 9:59 am ] |
| Post subject: | Harken Carbo 29mm blocks for jib and cheek?? |
Last night I was making selections off the APS catalog to place order on all the blocks I needed...Need to replace jib halyard, clew, traveler and mast cheek blocks on my H16. I had in mind the Harken Carbo blocks 29mm. Is it class legal to replace jib blocks with those not provided by Hobie Cat?? Also can I use a 29mm Carbo cheek block for the mast and also be legal in class racing?? thanks! |
|
| Author: | Banzilla [ Sun Jul 30, 2006 3:12 pm ] |
| Post subject: | |
Not into racing, but here is something that might help. I got the tielites for the jib they work great, just keep them out of the sand! http://mauriprosailing.com/Merchant2/me ... de=ODHOB16 |
|
| Author: | MBounds [ Sun Jul 30, 2006 3:32 pm ] |
| Post subject: | |
You can replace the jib blocks with anything you want. Most racers use Harken micro blocks, not the Carbos. They are attached to minimize the stack-up on the front crossbar:
|
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|