| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Hull Polish http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=49808 |
Page 1 of 1 |
| Author: | jpedsailing [ Wed Nov 13, 2013 12:47 pm ] |
| Post subject: | Hull Polish |
What is the best polish to use on h16 hulls? I have a newer boat and want to restore the hulls to their original shine, without affecting performance or breaking rrs rule 53. Thoughts? Thanks! |
|
| Author: | jim-doty [ Wed Nov 13, 2013 3:26 pm ] |
| Post subject: | Re: Hull Polish |
My favorites come from Gel Coat Labs. They have a heavy cut, a fine cut, and a micro-polish/sealant, depending on how bad off your hulls are. Jim |
|
| Author: | MBounds [ Wed Nov 13, 2013 7:54 pm ] |
| Post subject: | Re: Hull Polish |
My favorites are from 3M - they essentially have the same stuff (different grades / grits of polishes) Gel coat is actually pretty soft - go easy on it, and stay away from the vinyl hull graphics. |
|
| Author: | optikid [ Sat Nov 16, 2013 5:56 pm ] |
| Post subject: | Re: Hull Polish |
starbrite Teflon polish |
|
| Author: | jpedsailing [ Sun Nov 17, 2013 11:47 am ] |
| Post subject: | Re: Hull Polish |
Looking on the Starbrite site and can only find PTEF, not Teflon. Is it the same thing? |
|
| Author: | MBounds [ Sun Nov 17, 2013 8:49 pm ] |
| Post subject: | Re: Hull Polish |
jpedsailing wrote: Looking on the Starbrite site and can only find PTEF, not Teflon. Is it the same thing? Teflon® is DuPont's trademark name of their brand of polytetraflouroethelyne (PTFE). |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|