| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Magliner Trailer http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=52789 |
Page 1 of 1 |
| Author: | Capt Doug [ Sat Sep 06, 2014 4:50 am ] |
| Post subject: | Magliner Trailer |
Just bought a 16 and a magliner trailer. Where can I buy trailer parts? Thanks, Doug |
|
| Author: | MBounds [ Sun Sep 07, 2014 4:48 am ] |
| Post subject: | Re: Magliner Trailer |
While the Magline Company is still in business, they no longer make trailers. Most trailer parts, other than the frame, are off-the-shelf components. What specifically are you looking for? I've completely rebuilt a 1972 Magline from parts ordered on-line through www.easternmarine.com. The axle was an odd diameter that I couldn't find matching bearings for. So if you're looking to replace bearings, you might need to replace the axle, hubs and bearings - like I did. The old bearings will have an identification number on the outer race that you can Google to find their size. But for lights, tires, springs, hitch components and rollers, Eastern Marine is pretty convenient. |
|
| Author: | Capt Doug [ Thu Sep 11, 2014 5:06 pm ] |
| Post subject: | Re: Magliner Trailer |
Thank you. Eastern Marine has what I needed. Fabricated new cross bars w angle iron. Doug |
|
| Author: | Karl Brogger [ Sat Sep 13, 2014 5:38 am ] |
| Post subject: | Re: Magliner Trailer |
MBounds wrote: But for lights, tires, springs, hitch components and rollers, Eastern Marine is pretty convenient. That's the cheapest place I've seen E-Track. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|