| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Jib car screws and nuts definition http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=54430 |
Page 1 of 1 |
| Author: | yelkenli [ Mon Apr 13, 2015 6:44 pm ] |
| Post subject: | Jib car screws and nuts definition |
Does anyone know the screw and nut size for the two screws/nuts that hold together the jib car to the jib plate to the bullseye fairlead in this jib system: http://www.murrays.com/50-252322.html I tried some 10-24 1 1/4 inch stainless at the hardware store, but they were maybe 1/8 inch shorter than the old hardware; the nut was thicker; and the threads did not come through the nut. I can try the 1/ 1/2 inch, but would like to know if there is a definition, as they cannot be too long or they interfere with the integrated track. Hobie: can you add a parts blow-up to your catalogue? Thanks! Ted SC lake sailing 2007 Hobie 16 |
|
| Author: | mmiller [ Tue Apr 14, 2015 8:31 am ] |
| Post subject: | Re: Jib car screws and nuts definition |
Looks like 10/32 x 1 1/2. These come assembled from our Australian facility, so not 100% confident in the 10-32 part at the moment. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|