| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| rivets http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=56843 |
Page 1 of 1 |
| Author: | Massimo07 [ Fri Feb 05, 2016 12:07 am ] |
| Post subject: | rivets |
Dear Mr Miller would you be so kind to help me with complete list for rivets related to corners, front and rear crossbars with correct material for them (alu or s.steel) I will pass your list straight to a dealer advanced thanks Massimo |
|
| Author: | turbofan [ Fri Feb 05, 2016 5:47 am ] |
| Post subject: | Re: rivets |
Check the parts manual for the 16. http://www.hobiecat.com/support/hobie-16/ That should have a rivet guide for your boat. |
|
| Author: | Massimo07 [ Fri Feb 05, 2016 12:16 pm ] |
| Post subject: | Re: rivets |
Thank you but I'd been looking at it before post the inquiry but wasn't that clear to me , may be I missed something . I will double check. Thanks |
|
| Author: | mmiller [ Fri Feb 05, 2016 2:21 pm ] |
| Post subject: | Re: rivets |
From the parts guides... Front Crossbar Corner Casting 8011231 (6) Rear Crossbar Corner Casting 8011231 (6) Stainless steel. Part numbers indicate length: 8011231 RIVET POP 3/16 x 1/2 PH (Pan Head) Total of 12 per boat. |
|
| Author: | Massimo07 [ Sat Feb 06, 2016 1:11 am ] |
| Post subject: | Re: rivets |
Thank you Mr Miller i' ve found it in the us version parts guide , bat cause i'm from italy i've wached at the euro version and i donn't see any rivets list in it and the corner cast rivet code 99210003 ( only this mention to rivets at page 6 of the whole guide ) is indicated in aluminium , but i will follow your indication with s.steel Thanks |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|