Hobie Forums
http://www.hobie.com/au/en/forums/

lots of parts
http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=57456		 Page 1 of 1
Author:  natewag [ Sun Apr 24, 2016 6:02 pm ]
Post subject:  lots of parts
hi y'all,

i just bought a parts boat to get my 16 back on the water and it came with about 2 or 3 boats worth of parts,
I've got what i need out of the pile and now i have, well a pile.

no hulls but I've got extra rudders, castings, masts, booms, wires, tramp frames, and an extra cat trailer with good texas registration.

im in centreal texas and could stand to get it all out of the barn,

not looking for much money, just trying to clean up and recoup a little of the investment, let me know if y'all need anything

thanks

nathan
Author:  hobiesrock [ Mon Apr 25, 2016 7:14 pm ]
Post subject:  Re: lots of parts
Id do both rear corner frame castings if price is right shipped to 97739. I seem to have a knack for cracking them :lol:
Author:  ASDASC [ Fri Apr 29, 2016 12:05 pm ]
Post subject:  Re: lots of parts
Got any 6:1 mainsheet blocks?
Author:  TAMUmpower [ Fri Apr 29, 2016 12:48 pm ]
Post subject:  Re: lots of parts
If you have any swivel cam cleats with the curved base for mounting on the beam there may be some people looking for them from the H18 spinnaker thread for use as a spin halyard cleat. I just got a used one off ebay myself.
Author:  natewag [ Fri Apr 29, 2016 1:57 pm ]
Post subject:  Re: lots of parts
Steve,

I know I have a couple extra main sheet systems but I'll have to check and see what the blocks look like. I have not gone though everything just yet . I'm pretty sure I've got a 6:1. I'll be back at the ranch next weekend and I'll take a peek. I'll let you know.

Thanks

Nathan
Author:  GDavies [ Thu May 05, 2016 6:11 am ]
Post subject:  Re: lots of parts
I would be interested in a main sheet traveler. Pre-1994 version. Busted lower portion in a gybe last fall. I wont forget a traveler stop knot again. :oops:
Author:  ASDASC [ Fri May 13, 2016 3:54 am ]
Post subject:  Re: lots of parts
Good to know, Glenn! I am not sure if I have a stop knot, but will check next time out.

Original Poster: Please let me know on the blocks! I have the 5:1 Seaways still and would love to go to the 6:1 Harken's.

Thanks all,

Steve
Author:  John Ely [ Mon May 23, 2016 10:49 am ]
Post subject:  Re: lots of parts
Hi Nathan,

I would be interested in two jib sheet blocks with the car - for a 1982 H 16. Happen to have these? Sincerely, [email protected]
Author:  caflanag [ Tue May 24, 2016 12:18 pm ]
Post subject:  Re: lots of parts
I am in need of both lower rudder castings, the mast base, and the mast step. Also Trap wires if you have them.

I'm in the process of restoring a '80 H16.

Thank you.

Chris
Author:  mncatguy [ Sun Jun 12, 2016 1:41 pm ]
Post subject:  Re: lots of parts
Hi Nathan, I just snapped one of the rudders on my 74' hobie 16. Would really appreciate it if you could ship me one to 55021 if you still have one lying around.

thanks, Mike
Author:  vichang4 [ Sun Jun 12, 2016 2:02 pm ]
Post subject:  Re: lots of parts
Nathan
I'm new to the forum and I'm looking for the lower block and cleat for the main sheet on a hobie 16. Standard hobie part would work best for me.

Victor Toce
[email protected]
Author:  mncatguy [ Sat Jun 25, 2016 5:47 pm ]
Post subject:  Re: lots of parts
Hi Nathan, If you still have a rudder available I would love to buy one from you. Shoot me an email if you like at [email protected] Thanks, Mike
Author:  CherokeeSailor [ Sun Dec 04, 2016 5:02 pm ]
Post subject:  Re: lots of parts
Sorry to bring back an old thread, but you wouldn't happen to still have any of those bits and pieces laying around would you?
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/