Hobie Forums
http://www.hobie.com/au/en/forums/

Hobie 14 / 16 Tiller Crossbar Diameter?
http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=58553		 Page 1 of 1
Author:  paragon1970 [ Mon Jul 25, 2016 5:06 am ]
Post subject:  Hobie 14 / 16 Tiller Crossbar Diameter?
Hi Folks,

Anyone know the diameter of the tiller crossbar of the H14/16 unfortunately I do not have access to either of my boats to measure at present.
Sadly currently laid up with lower back spasms so God only nows when I will get to them. Grrr :-(
Want info of measurement so I can design a 3d part on computer to allay my boredom and frustration, sick of the sight of daytime TV!

Thanks
SRG
Author:  paragon1970 [ Mon Jul 25, 2016 5:16 am ]
Post subject:  Re: Hobie 14 / 16 Tiller Crossbar Diameter?
Bit more info looking at designing and printing some contour washers for the tiller bar.
Looked on Ebay and found some located in the US priced $6.99 but shipping to UK is a whopping $48.50 :shock:

http://www.ebay.co.uk/itm/Hobie-Cat-Tiller-Connector-Bolt-Kit-with-Contour-Washers-/281258042570?hash=item417c4924ca:g:wskAAMXQgb1RWQtv

Cheers,
SRG
Author:  rattle 'n hum [ Mon Jul 25, 2016 6:32 am ]
Post subject:  Re: Hobie 14 / 16 Tiller Crossbar Diameter?
SRG: On my 2008 H16, the outer diameter of the crossbar is 1 1/8 inches.
Author:  paragon1970 [ Mon Jul 25, 2016 7:05 am ]
Post subject:  Re: Hobie 14 / 16 Tiller Crossbar Diameter?
rattle 'n hum wrote:
SRG: On my 2008 H16, the outer diameter of the crossbar is 1 1/8 inches.


Thanks Jerome, that sounds about right, my H16 is circa 1980's not sure if the later versions had revised sizes, I suspect not since from memory my H14 appeared to have the same diameter crossbar as my H16,

Thanks again.
Author:  cpnsoo [ Tue Jul 26, 2016 12:34 am ]
Post subject:  Re: Hobie 14 / 16 Tiller Crossbar Diameter?
I would think you'd be able to get these connectors from a European hobie dealer. The guy on ebay is selling a used part for the same price as new.
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/