| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| corner casting rivets http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=60730 |
Page 1 of 1 |
| Author: | sunvista [ Wed Jun 07, 2017 2:46 pm ] |
| Post subject: | corner casting rivets |
Anyone know the proper length of the rivets holding the beams to the corner castings? Also, I have some monel rivets on hand and was wondering if these would be appropriate for this purpose? |
|
| Author: | Jbernier [ Wed Jun 07, 2017 2:58 pm ] |
| Post subject: | Re: corner casting rivets |
Corner Casting rivets # 8011231 3/16 x 1/2" Stainless (or through any dealer directly: https://www.hobie.com/dealers/ |
|
| Author: | MBounds [ Wed Jun 07, 2017 7:45 pm ] |
| Post subject: | Re: corner casting rivets |
Monel rivets are acceptable - even preferred - as they reduce the corrosion between the casting/beam and rivet. |
|
| Author: | sunvista [ Thu Jun 08, 2017 5:40 am ] |
| Post subject: | Re: corner casting rivets |
Thanks for the input! |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|