| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Riveting a h16 masthead 160427710 to the mast http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=61651 |
Page 1 of 1 |
| Author: | lourencoalmeida [ Fri Oct 06, 2017 11:05 am ] |
| Post subject: | Riveting a h16 masthead 160427710 to the mast |
Does anyone know that the thickness of the masthead - part number 160427710, old H16 - is, or in other words, what length should the rivets be to attach the mast head to the mast? Thank you |
|
| Author: | mmiller [ Fri Oct 06, 2017 3:57 pm ] |
| Post subject: | Re: Riveting a h16 masthead 160427710 to the mast |
That is not a Hobie USA part number, but if this is the old style cast mast head, you would need 8010131 RIVET POP 3/16x3/8 PH-SS |
|
| Author: | happy sailor [ Wed Oct 11, 2017 7:59 pm ] |
| Post subject: | Re: Riveting a h16 masthead 160427710 to the mast |
You will need a good rivet gun. Stanley from home depot. Lubricate bore of gun withwf40.ensure one mandrel is expelled before inserting another rivet. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|