Hobie Forums
http://www.hobie.com/au/en/forums/

Quickpin for 6:1 main downhaul
http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=64395		 Page 1 of 1
Author:  yelkenli [ Sat Mar 16, 2019 4:23 pm ]
Post subject:  Quickpin for 6:1 main downhaul
Does anyone know a part number or pin diameter for a quick-pin that will work in the small holes in a Hobie 16 6:1 main downhaul? I attach/detach the downhaul via the ring-ding on the part that is screwed in the mast track. There is no room for fingers and it is a 'you know what' to install/remove.
Author:  rattle 'n hum [ Sun Mar 17, 2019 6:38 am ]
Post subject:  Re: Quickpin for 6:1 main downhaul
Totally agree....after first time rigging with the regular clevis/ring ding, I installed a quick pin. Diameter is 3/16".....same as main traveler deck plate....pretty sure the part in the track IS a main traveler deck plate. Not sure about length.
Author:  bmdumr [ Wed Mar 27, 2019 7:27 pm ]
Post subject:  Re: Quickpin for 6:1 main downhaul
rattle 'n hum wrote:
Totally agree....after first time rigging with the regular clevis/ring ding, I installed a quick pin. Diameter is 3/16".....same as main traveler deck plate....pretty sure the part in the track IS a main traveler deck plate. Not sure about length.
Jerome's right, it's the same as main traveler deck plate, so you could use one of these... https://www.murrays.com/product/18-3m075/ (I have no affiliation with Murray's, just easy to link to)
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/