| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Bevel side rail neoprene http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=66188 |
Page 1 of 1 |
| Author: | Dookie [ Tue Feb 25, 2020 2:38 pm ] |
| Post subject: | Bevel side rail neoprene |
Matt: In a prior post you mentioned that for the Worlds boats the side rail neoprene was beveled. Can you tell me how that was done? I was thinking of doing it by hand with a dremel and sanding drum, but wanted to check with the pros first to see if there's a better way. Thanks, Daniel 2002 H16 |
|
| Author: | HobieMarty [ Tue Feb 25, 2020 2:43 pm ] |
| Post subject: | Re: Bevel side rail neoprene |
What are the advantages of beveling the neoprene? |
|
| Author: | mmiller [ Tue Feb 25, 2020 4:12 pm ] |
| Post subject: | Re: Bevel side rail neoprene |
Under the rail, so the trapeze rope and bungee do not catch on it. You can use a knife. |
|
| Author: | HobieMarty [ Tue Feb 25, 2020 4:43 pm ] |
| Post subject: | Re: Bevel side rail neoprene |
mmiller wrote: Under the rail, so the trapeze rope and bungee do not catch on it. You can use a knife. Ahhhhhh, I see. Good idea!!! |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|