Hobie Forums
http://www.hobie.com/au/en/forums/

Bent mast and difficult main hoisting
http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=67632		 Page 1 of 1
Author:  marquiskissel [ Mon Nov 16, 2020 7:42 pm ]
Post subject:  Bent mast and difficult main hoisting
Hey guys! Looking for some advice. I have a mast with a slight bend about 3/4 of the way up. My mainsail (starting about 3/4 of the way up) is incredibly difficult to hoist the rest of the way. I thought it was my masthead sheave, so I replaced it. I thought it was my luff cord, so i had a sailmaker repair that, but it is still giving me fits. Do you think it is related to my mast bend? Any solutions apart from a new mast? I have read other posts here about people trying to bend the mast back, and it seems like it is rarely successful.

Would love some advice...and maybe a mast if anyone has one for sail near Birmingham, Al!

:D
Author:  mmiller [ Tue Nov 17, 2020 2:03 pm ]
Post subject:  Re: Bent mast and difficult main hoisting
This is very typical. The sails on Hobie Cats have a LOT of shape cut in the luff curve. This curve hoisting up a straight track binds.

Here is a hoist FAQ that should help. Understand that even World level racers have the same issues and sometimes have difficulty. The trick is to pay attention to the instructions in the FAQ.

https://www.hobie.com/forums/viewtopic.php?f=18&t=371
Author:  marquiskissel [ Wed Nov 18, 2020 8:16 pm ]
Post subject:  Re: Bent mast and difficult main hoisting
Excellent! That makes me feel better. And it seems like I can stick with my bent mast. Thanks for the help!
Author:  gford [ Thu Nov 19, 2020 6:59 pm ]
Post subject:  Re: Bent mast and difficult main hoisting
Bent Mast - see >> https://youtu.be/4YVQDNdBhYg >> this is Joe of Joyrider TV on YouTube

Hoist the Main Sail - Use water and wet down all of the luff cord. It will act as
a lubricate as you pull the main up and make it easier.

Good Luck

Greg 1984 H16
Author:  marquiskissel [ Fri Nov 20, 2020 7:59 am ]
Post subject:  Re: Bent mast and difficult main hoisting
I will give that a try! Thanks!
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/