| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Hull and mast repairs http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=68156 |
Page 1 of 1 |
| Author: | Smerk [ Sat Apr 10, 2021 4:19 pm ] |
| Post subject: | Hull and mast repairs |
I am new to this forum. I am considering buying an older Hobie 16. The hull is sound, but the previous owner “ slapped” on strips of fibreglass on the bottom of the hulls due to the fact he launched it on small rocks. I believe I can simply sand off the fabric, but then would need to restore the hull. Quite a few small dings. Soooo, should use a body filler or gelcoat to repair the dents? Also, once that is done, should I apply a marine paint or spray gelcoat? The mast and spars are faded, so after reading some older forums, should I simply use Penatrol or spray on a Rust type of paint? Thanks in advance. Smerk |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|