| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| '88 Hobie 16 Hull Repair http://www.hobie.com/au/en/forums/viewtopic.php?f=14&t=71613 |
Page 1 of 1 |
| Author: | Loosecannon33 [ Wed Aug 14, 2024 4:50 pm ] |
| Post subject: | '88 Hobie 16 Hull Repair |
Hello, I recently acquired an '88 Hobie 16, but it needs some repairs. The right hull has a couple gashes and a soft spot surrounding those gashes. The damaged area is just ahead the front pylon. I was wondering the best way to approach repairing the hull. My current plan is to repair the damaged fiber glass first and then drill and inject epoxy. Is there a better way or something I'm not considering in this plan? Any advice is appreciated! Images of the damage:     
|
|
| Author: | Tim H16 [ Thu Aug 15, 2024 12:46 pm ] |
| Post subject: | Re: '88 Hobie 16 Hull Repair |
There was a good article by Rick Buchann in the May/June 2008 issue of Hotline on pages 16-17, "This Old Hobie: Blind Hole Repair". https://media.hobie.com/2010_archive/hobieclass/eHCA_Hotline05-06_2008.pdf |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|