Hobie Forums
http://www.hobie.com/au/en/forums/

rear hatch/battery question
http://www.hobie.com/au/en/forums/viewtopic.php?f=140&t=64145		 Page 1 of 1
Author:  Bob Moseler [ Sun Jan 06, 2019 12:49 pm ]
Post subject:  rear hatch/battery question
I was wondering if I install a round hatch in the back area of a 2019 outback if there is room for the Hobie battery mount to fit.
Has anyone installed one and mounted their battery there?
I don't want to have it installed and not be able to use it for the battery.
Thanks so much for any input.
Author:  johnnybravo [ Mon Jan 07, 2019 3:44 am ]
Post subject:  Re: rear hatch/battery question
Fits perfect!
Image
Image
Image
Image


Sent from my iPhone using Tapatalk Pro
Author:  Bob Moseler [ Mon Jan 07, 2019 3:47 pm ]
Post subject:  Re: rear hatch/battery question
Thanks so much that is exactly what i needed to know.
I really appreciate your help.
Author:  roastman [ Sat Jan 19, 2019 3:03 pm ]
Post subject:  Re: rear hatch/battery question
FPV also have a brilliant hatch kit for their lithium batteries... The 17.5 AH battery fits perfectly.
Author:  OutdoorsMaster59 [ Sat Feb 23, 2019 7:13 pm ]
Post subject:  Re: rear hatch/battery question
Good info, I am planning to do the same.
Author:  davether55 [ Sun Nov 10, 2019 5:22 am ]
Post subject:  Re: rear hatch/battery question
Thanks for the pics.

I recently installed the rear 8” hatch and oriented it with the lid to open toward bow (opposite the pic shown). This orientation from a You Tube rigging video. Is there any difference other than can’t easily access while on the water?

Also, I noticed the rudder pull line moves across the hatch opening when pulled and cleated. Is there a need to route the line around the hatch under the hull or is this OK?

Thanks for any advice.
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/