Hobie Forums
http://www.hobie.com/au/en/forums/

Lowrance Ready transducer fitting hardware (2016 Outback)
http://www.hobie.com/au/en/forums/viewtopic.php?f=140&t=65124		 Page 1 of 1
Author:  johnodon [ Wed Jul 10, 2019 6:00 am ]
Post subject:  Lowrance Ready transducer fitting hardware (2016 Outback)
Hello all...first post here.

I recently acquired a 2016 Outback. I am in process of piecing together the required parts to install a Hook2 5 Splitshot. Unfortunately, the kayak did not come with the original owners manual OR transducer install kit. I was able to order the grommets for the wiring, however, I am having trouble sourcing the parts needed to mount the transducer onto the Lowrance Ready plate. Is anyone aware of part # I can order?

I think this is what I need but I don't want to order from Australia. :S

https://hws.com.au/product/lowrance-rea ... -hardware/

Image

Any help would be appreciated!

John
Author:  shoffer [ Fri Sep 13, 2019 5:52 am ]
Post subject:  Re: Lowrance Ready transducer fitting hardware (2016 Outback
I found the parts (not in a kit, but separate) here https://americankayaksupply.com/hobie-l ... SnEALw_wcB

and here https://americankayaksupply.com/hobie-lowrance-adapter/
Author:  Yakass [ Wed Oct 02, 2019 10:21 pm ]
Post subject:  Re: Lowrance Ready transducer fitting hardware (2016 Outback
You need:

86506001 - 2 x Lowrance Adaptor brackets
86506201 - 2 x Transducer support clips
8050211 - 1 x Nylock nut
86509501 - 1 x Screw

Those are the individual parts as shown in that photo, and yep, that should be all you need to fit the tranny
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/