Check this out. You should be able to see how the routing goes underneath the H-Track.
I believe the bungee is 3/16"
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| 2019 Hobie Outback H-Rail gear holder bungie replacement http://www.hobie.com/au/en/forums/viewtopic.php?f=140&t=65159 |
Page 1 of 1 |
| Author: | rogeraford [ Sun Jul 14, 2019 8:46 am ] |
| Post subject: | 2019 Hobie Outback H-Rail gear holder bungie replacement |
I removed the H-Rail from the front of my 2019 Hobie Outback and put in a bungie so I could put a thicker worm bag in that spot. UNFORTUNATELY, I didn’t really know what I was doing and cut the bungie that is the gear holder. NOW I realize it wraps around some pulleys (?) and pins. Is there any video showing how to re-string new bungies? What size bungie do I need? I want to do that since I’ll be selling my brand new Hobie Outback to buy the Mirage Drive 360! Thanks! Roger, The Smiling BassHole |
|
| Author: | HStrech [ Tue Jul 23, 2019 5:01 pm ] |
| Post subject: | Re: 2019 Hobie Outback H-Rail gear holder bungie replacement |
Check this out. You should be able to see how the routing goes underneath the H-Track. I believe the bungee is 3/16" |
|
| Author: | ckline [ Sat Sep 07, 2024 4:18 pm ] |
| Post subject: | Re: 2019 Hobie Outback H-Rail gear holder bungie replacement |
Quote: I believe the bungee is 3/16" I just replaced these on my Outback today. For anyone who might need to do this in the future, the bungee size is actually 1/8". |
|
| Author: | Vsara [ Thu May 29, 2025 7:37 am ] |
| Post subject: | Re: 2019 Hobie Outback H-Rail gear holder bungie replacement |
Just confirming what ckiline said, the correct bungee size is 1/8", not 3/16". I tried both on my 2019 Outback, and 1/8" fits best through the pulleys and anchors. That diagram HStrech linked is spot on for the routing. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|