| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| 2011 outback steering nut http://www.hobie.com/au/en/forums/viewtopic.php?f=140&t=65933 |
Page 1 of 1 |
| Author: | edwardsajl [ Mon Dec 30, 2019 9:10 pm ] |
| Post subject: | 2011 outback steering nut |
Hi everyone. I have a 2011 outback that has tight steering. I have narrowed it down to the brass nut that is fitted into the kayaks plastic. It seems to have welded itself on to the staino fitting. It is spinning in the hull hence the tight steering. Had anyone experienced this issue before? Thanks |
|
| Author: | Dr.SteelheadCatcher [ Wed Jan 01, 2020 6:54 am ] |
| Post subject: | Re: 2011 outback steering nut |
I don't know what you are calling the "staino fitting"......maybe stainless steel??? Have you seen this link on the "twist and stow" system operation? https://static.hobiecat.com/digital_ass ... 1577885901 |
|
| Author: | edwardsajl [ Wed Jan 01, 2020 10:03 am ] |
| Post subject: | Re: 2011 outback steering nut |
yeah mate stainless steel. ive seen that but it doesnt have anything relating to what im after. |
|
| Author: | Dr.SteelheadCatcher [ Wed Jan 01, 2020 1:31 pm ] |
| Post subject: | Re: 2011 outback steering nut |
can you post a photo of the problem ?? |
|
| Author: | mmiller [ Thu Jan 02, 2020 12:06 pm ] |
| Post subject: | Re: 2011 outback steering nut |
Is is the brass at the steering handle? Yes, corrosion could be an issue. Maybe of penetrating oil? If you could get the stainless loose in the brass, maybe that would be all you would need to do. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|