| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| twist and stow shock cord question http://www.hobie.com/au/en/forums/viewtopic.php?f=140&t=66275 |
Page 1 of 1 |
| Author: | jmk837 [ Thu Mar 26, 2020 6:02 am ] |
| Post subject: | twist and stow shock cord question |
The shock cord that retracts the "up" cord to my twist and stow has detached itself from its anchor point inside my outback. Any suggestions on how i can reattach? The anchor point appears to be inaccessible. It is still attached to the "up"line. |
|
| Author: | mmiller [ Thu Mar 26, 2020 8:27 am ] |
| Post subject: | Re: twist and stow shock cord question |
No rear hatch access? They would have needed to reach in to attach it, to begin with. |
|
| Author: | Duncan49 [ Thu Mar 26, 2020 9:47 am ] |
| Post subject: | Re: twist and stow shock cord question |
I think I answered you on Facebook about this. I just had the same problem on my Revolution. I didn't want to untie the t handle so I detached the front pulley to give slack to the line. I then pulled the shock cord to where I could reach it through the rear hatch. I used 2 quick ties to reattach to the original point. Reattached the pulley, it is now under pressure but once you get the first bolt started the rest is easy. I used quick ties instead of the hog rings because it is just easier to do it with two hands. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|