| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| 2017 outback steering rigging http://www.hobie.com/au/en/forums/viewtopic.php?f=140&t=67455 |
Page 1 of 1 |
| Author: | Dagillespie [ Mon Sep 28, 2020 12:05 pm ] |
| Post subject: | 2017 outback steering rigging |
My yak escaped during a storm and the rudder got ripped off. I have all the new parts, but the repair manual online doesn’t really match what I have. Instead of a tee shaped steering control, mine is a single lever, with both lines attached at the same point (I think). I’m pretty sure it’s not broken off. There also seems to be a pulley fwd of the lever near the rod holder that I don’t think is for the up/down control. It seems like one of the rudder lines needs to go through this pulley and back to the lever. Does the steering line go though the pulley? If so, left or right? Do I route the all four lines along the left side or do I still route the right up the right side? Do I still need them to cross? Sorry if this has been addressed somewhere else...... Thanks |
|
| Author: | mmiller [ Tue Sep 29, 2020 10:57 am ] |
| Post subject: | Re: 2017 outback steering rigging |
Likely one line attaches to the lever directly. The other rouse to the forward pulley and then back to the lever. How old? |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|