| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Crack in hull at mirage drive knob http://www.hobie.com/au/en/forums/viewtopic.php?f=140&t=71096 |
Page 1 of 1 |
| Author: | Douwey [ Wed Sep 13, 2023 12:39 pm ] |
| Post subject: | Crack in hull at mirage drive knob |
Hi everybody, A few weeks ago bought my first (second hand) hobie kayak and was really happy with it, but recently it started leaking. After a lot of searching I found a crack near the place where the knob is that fixes the drive in place. It's rather small and at an inconvenient place. Can someone give me advice on how to fix it? I hope someone can help me do I can go paddling again soon. Douwe https://photos.app.goo.gl/Xici3f3C6KyQNTBZA |
|
| Author: | Dr.SteelheadCatcher [ Wed Sep 13, 2023 7:09 pm ] |
| Post subject: | Re: Crack in hull at mirage drive knob |
The following link is not exactly where your crack is but the repair method using Scotch-weld 8010 and the correct preparations apply. https://www.hobie.com/forums/viewtopic.php?f=11&t=40951 You did not say which model and year your Hobie is, but it's probably 2006 vintage.... Good luck with your repair. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|