| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Passport 12 springs for mirage drive clips http://www.hobie.com/au/en/forums/viewtopic.php?f=142&t=68025 |
Page 1 of 1 |
| Author: | Spitdog [ Tue Mar 16, 2021 7:43 pm ] |
| Post subject: | Passport 12 springs for mirage drive clips |
I've owned my passport 12 for 10 months. I use it weekly in salt water and rinse it off religiously. Till now never a problem. I've added rectangular hatch, sail kit, and furler. For folks sitting on fence over concerns of not being roto molded i can testify these are much thicker plastic than the rotomolded kayaks. Well, I finally broke something and don't see the parts in the inventory of hobie kayak parts. Its the stain less springs that hold the mirage drive clips down. Any body know where I can buy some? |
|
| Author: | cvandorssen [ Wed Mar 17, 2021 2:52 pm ] |
| Post subject: | Re: Passport 12 springs for mirage drive clips |
I think you're talking about the "Click-n-Go" latches. You can order the cam lever as well as the springs from your local Hobie dealer. Here's the part numbers: CAM LEVER / CLICK-N-GO WELL 79050011 SPRING / i - CLICK-N-GO WELL 79050021 https://www.hobie.com/dealers/ |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|