| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| 2021 10.5 Passport scupper holes blocked http://www.hobie.com/au/en/forums/viewtopic.php?f=142&t=70068 |
Page 1 of 1 |
| Author: | Dockan [ Thu Jul 21, 2022 10:43 am ] |
| Post subject: | 2021 10.5 Passport scupper holes blocked |
The scupper holes on my passport 10.5 are not fully drilled out. This prevents my kayak cart from being able to seat into the scupper holes properly. Should I drill them out or will I cause my kayak to leak and take on water? (Ps, I bought the 12.0 passport at the same time and it's scupper holes are not blocked, meaning I can get it on my kayak cart) |
|
| Author: | Jbernier [ Thu Jul 21, 2022 1:17 pm ] |
| Post subject: | Re: 2021 10.5 Passport scupper holes blocked |
Sorry to hear that - should have been caught in our factory or at the dealer PDI inspection.... you can have a dealer help - or if you're able - A 1-3/8” hole saw would work best. You can also drill a smaller hole in the middle and use a Dremel tool to open it up to 1-3/8” |
|
| Author: | Dockan [ Fri Jul 22, 2022 4:16 am ] |
| Post subject: | Re: 2021 10.5 Passport scupper holes blocked |
Thanks, I will try drilling the 1 and 3/8 diameter hole. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|