You are lucky ,mine has bubble under plastic and hobie reply it is just cosmetic...maybe i should try pop it with a pin.....
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Bubbles in deck pad http://www.hobie.com/au/en/forums/viewtopic.php?f=146&t=69047 |
Page 1 of 1 |
| Author: | Kirkcha [ Sat Sep 11, 2021 9:29 am ] |
| Post subject: | Bubbles in deck pad |
Got a couple big bubbles in the deck pad and response from Hobie was I should be able to put an invisible hole in it to let the air out. No hole is invisible and seems like I would be opening up a passage for air and water to get in it it doesn’t adhere back down. Anyone else have to do this yet? |
|
| Author: | wdkerber [ Mon Sep 13, 2021 6:42 am ] |
| Post subject: | Re: Bubbles in deck pad |
I've done this with similar pads (not my Lynx) and it works fine. Pop the bubble with a pin and squeeze the air out. The adhesive on the back will hold the pad to the deck once the bubble is gone. |
|
| Author: | Lynx Rider [ Mon Sep 13, 2021 10:50 am ] |
| Post subject: | Re: Bubbles in deck pad |
Use a straight pin. It wont ause a problem. Mine went away when I left it in the sun a little while and rubbed them out. |
|
| Author: | Kovac50 [ Mon Sep 13, 2021 1:20 pm ] |
| Post subject: | Re: Bubbles in deck pad |
You are lucky ,mine has bubble under plastic and hobie reply it is just cosmetic...maybe i should try pop it with a pin.....
|
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|