Hobie Forums
http://www.hobie.com/au/en/forums/

Lynx modifications
http://www.hobie.com/au/en/forums/viewtopic.php?f=146&t=69544		 Page 1 of 1
Author:  Tombo [ Fri Feb 25, 2022 2:11 pm ]
Post subject:  Lynx modifications
My modifications to Hobie Lynx. I installed the Lynx H rails, H rails from a newer Outback, using only one rail across the bow. Length was cut down so as to screw into two of the four preset holes. I did this to mount a rod holder and stow my paddle under it. I used two tie wraps as loops to make it easier to secure/remove the rear seat to the kayak. Attached a loop using stretch cord to secure my rudder to the rudder cables, I got tired of removing the rudder after every trip, this way the wind will not blow it around. Lastly I purchased a seat riser kit from a cool guy in Navarre Beach, raised the front one inch, the the rear one and half inches. I am selling the 180 drive that came with it, never used as I use the Hobie with kick up fins.

Tell us your modifications.
Author:  Tombo [ Mon Feb 28, 2022 2:01 pm ]
Post subject:  Re: Lynx modifications
Kind of quiet in here.
Author:  rockcrawler [ Thu Mar 10, 2022 1:06 pm ]
Post subject:  Re: Lynx modifications
Why is it you don't like the 180 drive?
Is it just that you already had a non-reversable drive and were fine without the reversing feature?
Author:  Mahi [ Fri Mar 11, 2022 1:54 am ]
Post subject:  Re: Lynx modifications
Pics or it didn't happen :)
Author:  Tombo [ Fri Mar 11, 2022 5:57 am ]
Post subject:  Re: Lynx modifications
I will try to take pictures before the cold front comes in.
Author:  Tombo [ Tue Mar 15, 2022 4:28 am ]
Post subject:  Re: Lynx modifications
I have the pictures, but how do I Post them?
Author:  Mahi [ Tue Mar 15, 2022 4:44 am ]
Post subject:  Re: Lynx modifications
Probably easiest way to do it is to open a free account at this site https://postimg.cc . Your pictures can be uploaded to this site. You then click on the pic and click share, then click on Hotlink For Forums and paste that into the post here.
Author:  Second Skin [ Fri Mar 18, 2022 4:15 pm ]
Post subject:  Re: Lynx modifications
this forum is stuck in the dark ages. pictures aren't going to happen
Author:  schatten [ Fri Mar 18, 2022 7:56 pm ]
Post subject:  Re: Lynx modifications
Easy and handy mods and hacks video
https://youtu.be/OYnURHEJBCg
Author:  Mahi [ Fri Mar 18, 2022 8:43 pm ]
Post subject:  Re: Lynx modifications
Pictures can be done using the method I described. To show that check this, my first ever thread here

https://www.hobie.com/forums/viewtopic.php?f=11&t=69475
Author:  Tombo [ Sat Mar 19, 2022 3:41 am ]
Post subject:  Re: Lynx modifications
rockcrawler wrote:
Why is it you don't like the 180 drive?
Is it just that you already had a non-reversable drive and were fine without the reversing feature?


Already have a drive with kick up fins. No need for 180 drive so I sold it unused to someone else that needs it.
Author:  Tombo [ Sat Mar 19, 2022 5:39 am ]
Post subject:  Re: Lynx modifications
Why is this site so difficult to post pictures? I belong to other forums and all of them are easy.
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/