| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Adhesive for anchor trolley http://www.hobie.com/au/en/forums/viewtopic.php?f=146&t=70724 |
Page 1 of 1 |
| Author: | Normgreg [ Fri May 05, 2023 3:41 am ] |
| Post subject: | Adhesive for anchor trolley |
I want to find out what the”ASA Polymer outer skin” on the Linx is. So I can get the proper epoxy. I want to attach the anchor trolley hardware to the outer skin with epoxy. If anyone has done it, what were the results. |
|
| Author: | Mahi [ Sat May 06, 2023 4:05 am ] |
| Post subject: | Re: Adhesive for anchor trolley |
Straight up I don't think any epoxy is going to be reliable under those conditions. If you cannot attach a nut on the inside to a bolt, how about using a wellnut? |
|
| Author: | dcr [ Thu May 11, 2023 6:48 am ] |
| Post subject: | Re: Adhesive for anchor trolley |
I ran into a problem affixing an anchor trolley to my Sport last year. I got advice here and ended up using both wellnuts and rivets. The use of rivets makes the installation permanent. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|