Hobie Forums
http://www.hobie.com/au/en/forums/

Hobie FX1 Mainsheet Line Length
http://www.hobie.com/au/en/forums/viewtopic.php?f=15&t=64573		 Page 1 of 1
Author:  leeboweffect [ Fri Apr 19, 2019 6:39 am ]
Post subject:  Hobie FX1 Mainsheet Line Length
I have consulted the FX1 parts manual only to find a photo of a yellow line threaded through the mainsheet system and a ref 17560419. Does anyone know the specified line diameter and length for the mainsheet? Also what was the original purchase of the mainsheet system 7:1 or 8:1? The boat I'm working on right now has an older style Harken 7:1 that does not run well. I'm considering going 6:1.

Image

Thanks in advance,
Author:  mats_c [ Mon Apr 29, 2019 3:27 am ]
Post subject:  Re: Hobie FX1 Mainsheet Line Length
I can measure my FX1 length and diameter the coming days.
About main sheet system:
i have two triple blocks and each fitted with a single block attached to give higher purchase.
//Mats
Author:  leeboweffect [ Mon Apr 29, 2019 10:09 am ]
Post subject:  Re: Hobie FX1 Mainsheet Line Length
mats_c wrote:
I can measure my FX1 length and diameter the coming days.
About main sheet system:
i have two triple blocks and each fitted with a single block attached to give higher purchase.
//Mats


Thanks in advance.
Author:  mats_c [ Wed May 01, 2019 2:17 pm ]
Post subject:  Re: Hobie FX1 Mainsheet Line Length
After checking today:
Length: 13 meters sharp
Diameter: 12 mm

My main sheet is as on your picture - same color and i assume it's original (except the difference in the blocks i wrote before)

//Mats
Author:  leeboweffect [ Wed May 01, 2019 8:42 pm ]
Post subject:  Re: Hobie FX1 Mainsheet Line Length
mats_c wrote:
After checking today:
Length: 13 meters sharp
Diameter: 12 mm

My main sheet is as on your picture - same color and i assume it's original (except the difference in the blocks i wrote before)

//Mats


Thank you very much!
Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/