| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Hobie dimensions http://www.hobie.com/au/en/forums/viewtopic.php?f=17&t=3263 |
Page 1 of 1 |
| Author: | H14Turbo [ Thu Mar 30, 2006 11:48 am ] |
| Post subject: | Hobie dimensions |
What are the dimensions of the tramp frame on the 14 as i am designing a righting system and need the measurements because i cannot get to my boat at the moment. Thanks guys |
|
| Author: | fabiolav [ Sun Apr 02, 2006 3:12 am ] |
| Post subject: | RE: Hobie dimensions |
The frame is 1.88 m wide and 1.68 m long. Measures were taken about in the center of each corner casting. Width has been measured on the rear bar. Should you need to compute the momentum needed to right the boat, I have also weigthed relevant pieces: Code: Piece Weight/Kg Pounds
Starboard hull 28.1 61.95 Port hull 32 70.55 Mast total (2 pcs) 13.7 30.20 Jib, forestay, etc 4.3 9.48 Floating baloon 1.1 2.43 Main (dry) and Boom 8.4 18.52 For the same reason you might need to know that the baricenter of the mast is at 3.12 m from its base. Please post pictures and results of your work if it works well. Thanks, Fabio |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|