Hobie Forums

Flotation block size
Page 1 of 1

Author:  srm [ Sun Mar 01, 2020 5:16 pm ]
Post subject:  Flotation block size

Anyone know the size (length) of the foam flotation block inside the H14 hull? I have a 14 with a very slight bulge in the side of the hull in line with the forward pylon. I was thinking of installing an inspection port behind the front pylon to take a look and reinforce if necessary, but now I’m wondering if the foam block is going to obstruct access to the pylon.


Author:  mmiller [ Mon Mar 02, 2020 3:55 pm ]
Post subject:  Re: Flotation block size

Blocks are pretty small around and long. Not in the way.

Author:  srm [ Mon Mar 02, 2020 4:52 pm ]
Post subject:  Re: Flotation block size

Good to know. Thanks!


Author:  scotty1 [ Tue Mar 10, 2020 2:17 am ]
Post subject:  Re: Flotation block size

It's normal to have the bulge there. It's the attachment inside the hull for the pylon.

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group