| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Flotation block size http://www.hobie.com/au/en/forums/viewtopic.php?f=17&t=66203 |
Page 1 of 1 |
| Author: | srm [ Sun Mar 01, 2020 5:16 pm ] |
| Post subject: | Flotation block size |
Anyone know the size (length) of the foam flotation block inside the H14 hull? I have a 14 with a very slight bulge in the side of the hull in line with the forward pylon. I was thinking of installing an inspection port behind the front pylon to take a look and reinforce if necessary, but now I’m wondering if the foam block is going to obstruct access to the pylon. sm |
|
| Author: | mmiller [ Mon Mar 02, 2020 3:55 pm ] |
| Post subject: | Re: Flotation block size |
Blocks are pretty small around and long. Not in the way. |
|
| Author: | srm [ Mon Mar 02, 2020 4:52 pm ] |
| Post subject: | Re: Flotation block size |
Good to know. Thanks! sm |
|
| Author: | scotty1 [ Tue Mar 10, 2020 2:17 am ] |
| Post subject: | Re: Flotation block size |
It's normal to have the bulge there. It's the attachment inside the hull for the pylon. Steve |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|