| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| H14 gooseneck position from base of mast http://www.hobie.com/au/en/forums/viewtopic.php?f=17&t=71668 |
Page 1 of 1 |
| Author: | Trimaran Driver [ Tue Sep 17, 2024 6:49 pm ] |
| Post subject: | H14 gooseneck position from base of mast |
I'm using a H14 mast and boom on a home built trimaran. Where is the "Home position" for the boom/gooseneck on the mast relative to the mast extrusion base. I'm measuring for a set of custom fitted sails, and the home position is needed as a base for the luff, with additional positioning with the downhaul. Much obliged and thanks for any direct measurement. |
|
| Author: | rattle 'n hum [ Fri Oct 18, 2024 4:02 am ] |
| Post subject: | Re: H14 gooseneck position from base of mast |
On a new sail, the gooseneck should easily go into the luff track opening, but some downhaul should be required to pull it down where it's completely inside the luff track itself. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|