Anybody know of anyone in Chicago area that knows how (and has done) hull bottom jobs on a 16? I prefer not to attempt this, lest I end up screwing up my hulls.
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| H16 Hull Bottom Repair http://www.hobie.com/au/en/forums/viewtopic.php?f=20&t=12037 |
Page 1 of 1 |
| Author: | AlanRV8 [ Sun Mar 22, 2009 5:08 pm ] |
| Post subject: | H16 Hull Bottom Repair |
Anybody know of anyone in Chicago area that knows how (and has done) hull bottom jobs on a 16? I prefer not to attempt this, lest I end up screwing up my hulls.
|
|
| Author: | gary eudy [ Sun Mar 22, 2009 6:45 pm ] |
| Post subject: | |
Its really hard to mess up You can always sand away your mistakes away Unless you are racing a bottom job can probably wait My 16 had a really bad drag area however hobies have really thick keels half the fun of a hobie is working on them Gary |
|
| Author: | AlanRV8 [ Sun Mar 22, 2009 8:19 pm ] |
| Post subject: | |
I really need to get em' done, the beach here is all sand, so every time ya beach it, its gets "sanded" a little.....They've developed flat spots. |
|
| Author: | gary eudy [ Thu Mar 26, 2009 3:48 pm ] |
| Post subject: | |
If you do not race Try Marine Tex and place a little on the flat spots I have done this with a few boats with really good results important to mix per instructions Marine Tex is also good to have in the Hobie Hell Box The above fix is really fast and easy Gary |
|
| Author: | Quarath [ Thu May 07, 2009 10:48 am ] |
| Post subject: | Re: H16 Hull Bottom Repair |
Have you read the SEP/OCT 2008 Issue of Hobie Hotline. The The Old Hobie section should have you answers You can download old issues at http://www.hobiecat.com/hobieclass/ |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|