| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Hull Repair http://www.hobie.com/au/en/forums/viewtopic.php?f=20&t=1685 |
Page 1 of 1 |
| Author: | MoHobie [ Fri Apr 08, 2005 2:05 pm ] |
| Post subject: | Hull Repair |
I recently was given a 14 Hobie by a neighbor (long story). The biggest thing that needs to worked on is two holes in the outer hull. One hole is about an inch, the other is a little smaller. Any suggestions on what to use to patch them? |
|
| Author: | tchristian [ Fri Apr 08, 2005 10:51 pm ] |
| Post subject: | |
There is alot of products to fix your holes. I would do searches on fiberglass repair and read up on what will work best for you. try here for starters http://www.jamestowndistributors.com/de ... repair.htm If there are access ports it may help, I would also check the decks for soft spots. " Delaminated parts of the fiberglass " ,and flip the boat over and put a bead of waterproff epoxy around the edge where the fiberglass are sandwiched together. Todd |
|
| Author: | JaimeZX [ Mon Apr 25, 2005 10:57 am ] |
| Post subject: | |
Check out the repairs we made to my friend's Sunfish for ideas: http://www.JaimeZX.com/Boating |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|