| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Anything Magic about Git-Rot? http://www.hobie.com/au/en/forums/viewtopic.php?f=20&t=36840 |
Page 1 of 1 |
| Author: | wildlatin [ Sun Jul 17, 2011 9:52 am ] |
| Post subject: | Anything Magic about Git-Rot? |
I have a soft spot to fix and I certainly appreciate all the info here about what to do and how but... I'm wondering about Git-Rot brand versus other epoxy mixes. I can certainly do better from a price point on a thin 2-part epoxy with 30+ minute working time- so, is there anything really superior about Git-Rot (brand)? Also, and related, is there a general way to calculate based on the area of the soft spot on top of the hull how much epoxy I need- since it has a finite shelf life? I imagine it would be related to the density of holes drilled into the top hull layer- 1 hole/sq.in., per 4 sq.in, etc. and what drilling pattern is adequate for an acceptable repair? Thanks for your input! |
|
| Author: | mmiller [ Sun Jul 17, 2011 10:07 am ] |
| Post subject: | Re: Anything Magic about Git-Rot? |
Penetration, viscosity, hardness when cured (not too hard), bonding strength, easy application... All good with Git-Rot |
|
| Author: | J_Eaton [ Mon Jul 18, 2011 7:18 pm ] |
| Post subject: | Re: Anything Magic about Git-Rot? |
nothing magic about git-rot...it just works buy a kit of it and your use questions are answered in the instructions |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|