| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Repairing the finish on black carbon EPO2 rudders http://www.hobie.com/au/en/forums/viewtopic.php?f=20&t=41766 |
Page 1 of 1 |
| Author: | Dan Ward [ Sat Mar 24, 2012 4:25 pm ] |
| Post subject: | Repairing the finish on black carbon EPO2 rudders |
You guys have any suggestions for what works well to repair scratches and dings in carbon EPO blades. In a few places I need to repair just the thin clear finish layer. I think it's epoxy but it could be polyester. |
|
| Author: | MBounds [ Sun Mar 25, 2012 6:11 am ] |
| Post subject: | Re: Repairing the finish on black carbon EPO2 rudders |
Epoxy will amber badly if you don't provide UV protection. To repair the outer clear coat, you need clear coat resin. US Composites sells a surfboard resin - "Silmar 249 Clear Polyester Surfboard Resin", here: http://www.uscomposites.com/polyesters.html (scroll down). Note that you'll need to get the sanding aid (surfacing wax) for it, otherwise, it won't cure completely. |
|
| Author: | Dan Ward [ Sun Mar 25, 2012 6:15 am ] |
| Post subject: | Re: Repairing the finish on black carbon EPO2 rudders |
Thanks Matt |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|