| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Masthead bedding compound http://www.hobie.com/au/en/forums/viewtopic.php?f=20&t=43335 |
Page 1 of 1 |
| Author: | Gahamby [ Sun Jun 17, 2012 11:44 am ] |
| Post subject: | Masthead bedding compound |
I have searched but haven't found. What is the preferred bedding compound, if any, for the masthead block on a H14? What is best for the foam plug and plate? The stuff I cleaned out smelled like Sikaflex. Thanks GH |
|
| Author: | rattle 'n hum [ Tue Jun 19, 2012 10:48 am ] |
| Post subject: | Re: Masthead bedding compound |
viewtopic.php?f=14&t=43244&p=180891&hilit=plug#p180891 |
|
| Author: | Gahamby [ Tue Jun 19, 2012 3:36 pm ] |
| Post subject: | Re: Masthead bedding compound |
Thanks,That was a good thread link. I thought it was Sikaflex. I ended up sticking the plate and foam plug to the bottom of the head block with 5200 and letting it cure outside the mast. I then bedded down the assembly into the mast with professional grade silicone and re riveted the head block. It will get checked this weekend in the Rappahanock River. GH |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|