| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Trailer beam wall thicknesses? http://www.hobie.com/au/en/forums/viewtopic.php?f=20&t=55592 |
Page 1 of 1 |
| Author: | AntonLargiader [ Thu Aug 06, 2015 6:24 am ] |
| Post subject: | Trailer beam wall thicknesses? |
I bent my old '79 Holsclaw trailer a bit and am looking to replace the tongue and crossbars. The crossbars I have wanted to replace for some time since they have been repaired (or spliced) since before I owned the trailer. The tongue got bent. All are galvanized box steel. My question, based on the availability of replacement trailer parts that I see, is how thick are they on other trailers? Mine are thicker than those that I see available online. My trailer tongue is 2x3 (typical) with a 1/8" or .125" wall thickness (thicker than commonly available). It is 7' long with a 5'2" protrusion beyond the bracing. My crossbars are 2x2 (typical) with a 3/32" or .094" wall thickness. They are 8' long and overhang the frame by about 30" in the front and 20" in the rear. How thick are your galvanized tongue and crossbars? |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|