A PHILLIPS screwdriver (big one) and some blue locktite.
J
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Forward crossbar screws http://www.hobie.com/au/en/forums/viewtopic.php?f=23&t=12735 |
Page 1 of 1 |
| Author: | Newton Jackson [ Wed Jun 10, 2009 11:33 am ] |
| Post subject: | Forward crossbar screws |
After sailing just 2 times, the screws holding the forward-most crossbar into the hulls are working themselves loose. Why is this, and what tool does one use to screw them back in? |
|
| Author: | mmiller [ Thu Jun 11, 2009 8:35 am ] |
| Post subject: | Re: Forward crossbar screws |
Should just be a blade screw driver as I recall. Maybe use some Blue Loc Tite if they don't hold, but have not heard of this as being an issue in the past. |
|
| Author: | Sail Revolution [ Thu Jun 11, 2009 9:48 am ] |
| Post subject: | Re: Forward crossbar screws |
A PHILLIPS screwdriver (big one) and some blue locktite. J |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|