Hobie Forums
http://www.hobie.com/au/en/forums/

not quite white hulls 07 getaway
http://www.hobie.com/au/en/forums/viewtopic.php?f=23&t=51110
Page 1 of 1

Author:  gofeversailor [ Mon Apr 28, 2014 10:09 am ]
Post subject:  not quite white hulls 07 getaway

hello all: I just removed the stripes from my hulls (they were looking pretty shabby) but now, of course, the area under the stripes is bright white and the hulls not so much. There is also a bit of adhesive residue where the stripes were located. I was going to use acetone, or some other solvent, to remove the remnants of the adhesive and maybe soft scrub with breach to whiten the hulls. Are these good ideas or does someone have a tried and true method of cleaning/whitening the hulls?? thanks.

Author:  kevinbatchelor [ Thu May 08, 2014 7:49 pm ]
Post subject:  Re: not quite white hulls 07 getaway

I have come up with two good cleaning options for your Getaway hulls. One is the magic easier.

http://www.mrclean.com/en_US/magic-eraser.

The second option is soft scrub bathroom cleaner. You want one of the cream based cleaners.

https://softscrub.com/products

Both of these products are slightly abrasive but there is nothing that I have found that does the trick.

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/