Hobie Forums
http://www.hobie.com/au/en/forums/

Crossbeam Hull Hole Cracks
http://www.hobie.com/au/en/forums/viewtopic.php?f=23&t=57316
Page 1 of 1

Author:  SailScott [ Thu Apr 07, 2016 5:26 pm ]
Post subject:  Crossbeam Hull Hole Cracks

Aft crossbeam hole cracks, anyone? I just noticed two in my 2013 port side hull. Is this common? Can they be fixed?

https://www.facebook.com/hobiegetaway/posts/545365888955990

Author:  leecea [ Fri Apr 08, 2016 8:24 am ]
Post subject:  Re: Crossbeam Hull Hole Cracks

This thread is for a cracks on a Wave hull, but maybe helpful: viewtopic.php?f=24&t=53865

Author:  mmiller [ Fri Apr 08, 2016 8:43 am ]
Post subject:  Re: Crossbeam Hull Hole Cracks

We have seen this in the past. Not something that ever caused a failure of some kind. I would forward the photos to your dealer to file a claim and see what they would do. You can not repair that.

Author:  SailScott [ Fri Apr 08, 2016 4:13 pm ]
Post subject:  Re: Crossbeam Hull Hole Cracks

Thanks for the replies... I believe my Hobie Dealer (Mike Linneman, Multi-Marine Marina Del Mar, CA) is no longer a Hobie Dealer...? Anyone else I can contact? Thanks much.

Author:  mmiller [ Fri Apr 08, 2016 5:04 pm ]
Post subject:  Re: Crossbeam Hull Hole Cracks

http://www.hobiecat.com/dealers/

Author:  SailScott [ Sat Apr 09, 2016 2:03 pm ]
Post subject:  Re: Crossbeam Hull Hole Cracks

Thanks, Matt. I have just emailed my situation and photos to my current dealer, Fastlane Sailing in San Diego... We'll see what happens.
Take care.
Scott

Author:  SailScott [ Sun Apr 24, 2016 10:42 am ]
Post subject:  Re: Crossbeam Hull Hole Cracks

Hobie provided a replacement hull... Thanks for standing behind your great line of products!

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/