So it looks like the mast head fork has completely come off my 2014 Getaway during a capsize.
Any ideas how to fix this?
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Mast Fork Fix? http://www.hobie.com/au/en/forums/viewtopic.php?f=23&t=58946 |
Page 1 of 1 |
| Author: | chtp66 [ Sat Aug 27, 2016 4:40 pm ] |
| Post subject: | Mast Fork Fix? |
So it looks like the mast head fork has completely come off my 2014 Getaway during a capsize. Any ideas how to fix this?
|
|
| Author: | chtp66 [ Mon Aug 29, 2016 6:50 am ] |
| Post subject: | Re: Mast Fork Fix? |
Adding some detail, I've got the parts from the Getaway (see pic attached)  parts catalog but it seems to imply that I need the sheave, spacer, screw and nut to replace whole hook assembly. I presume the spacer/nut need to go on the inside of the mast...? If so, any ideas how? The mast head assembly is riveted. Sent from my iPhone using Tapatalk |
|
| Author: | mmiller [ Mon Aug 29, 2016 9:36 am ] |
| Post subject: | Re: Mast Fork Fix? |
The hook is not shown as it is rarely replaced. It is the same as a Hobie 16. Requires rivets. May require larger rivets not they have pulled out or a backing plate inside the mast. Holes are 3/16", so if still OK. You can install with: 10680000 HOOK, HALYARD (12 GA) z267.jpg) 8011231 RIVET POP 3/16x1/2 PH and caps (15/64") 8011291 RIVET CAP |
|
| Author: | chtp66 [ Mon Aug 29, 2016 1:52 pm ] |
| Post subject: | Re: Mast Fork Fix? |
mmiller, thanks a lot. Much appreciated. Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|