Hobie Forums
http://www.hobie.com/au/en/forums/

Crossbeam ports in the hulls are cracked open inside hull
http://www.hobie.com/au/en/forums/viewtopic.php?f=23&t=62784
Page 1 of 1

Author:  KeithB [ Wed May 23, 2018 11:21 am ]
Post subject:  Crossbeam ports in the hulls are cracked open inside hull

Should I be concerned? Not sure how long it's been like this. Could have been like this for years for all I know. Never really stuck a camera inside to look around until last week when I was running a wire inside the hull for my new electric outboard to a battery inside the cooler storage box. The boat in a 2002 model year. Had it since 2009. This is the rear crossbar looking up from inside the hull. I stuck a camera down inside a deck plate port that I have behind the rear crossbar.


Starboard side:
https://photos.app.goo.gl/24lNtWboRclE1mCG3

Port side:
https://photos.app.goo.gl/tnRk5H7pkKXg7zw57

Author:  mmiller [ Wed May 23, 2018 2:12 pm ]
Post subject:  Re: Crossbeam ports in the hulls are cracked open inside hul

I have seen that before and never heard it as a structural issue.

Page 1 of 1 All times are UTC - 8 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/