| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Getaway trailer by Trailex wheel bearing and seal size http://www.hobie.com/au/en/forums/viewtopic.php?f=23&t=63386 |
Page 1 of 1 |
| Author: | KBlake [ Mon Aug 06, 2018 4:45 pm ] |
| Post subject: | Getaway trailer by Trailex wheel bearing and seal size |
Hello All, I recently purchased a 2013 Getaway, which came on this Trailex aluminum trailer: https://www.trailex.com/products/pc/A-C ... -11p34.htm I plan to do a fair amount of trailer sailing around the Pacific NW with it, so I wanted to service the wheel bearings and install Bearing Buddies on it, as preventative medicine. To my chagrin, I was unable to find any information as to what size seals and bearings were on the trailer, even from the local Hobie Dealer (West Coast Sailing) who sold the boat and trailer to the prior owner. They advised me to have LEs Schwab service the trailer. I removed a hub, popped out the bearings and seal, and here is the information for posterity: Bearings: L44649 Seals: 1.5" ID, 1.987" OD I hope that helps out a fellow Hobie owner in the future. Ken |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|