Getaway arms are supposed to be straight coming out of the EZ LOC Housing
z181.jpg)
Older boats with aluminum castings had a slight bend upwards.
z300.jpg)
| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| 2015 Getaway Tiller arms - one straight, one bent http://www.hobie.com/au/en/forums/viewtopic.php?f=23&t=64724 |
Page 1 of 1 |
| Author: | sailon1 [ Sat May 18, 2019 8:21 am ] |
| Post subject: | 2015 Getaway Tiller arms - one straight, one bent |
I have a 2015 Getaway. The tiller arms are not identical. One is bent up a bit, the other is straight. Is this correct, or is the bent one damaged? Any help appreciated. Jim |
|
| Author: | Steve C [ Sun May 19, 2019 4:55 pm ] |
| Post subject: | Re: 2015 Getaway Tiller arms - one straight, one bent |
On my 2017 they are straight other than the little 90 at the back. When I google it everything I see has a slight bend. I was thinking they made a change on that for the 2017s. Guess we need to wait for a better answer. Steve C, |
|
| Author: | mmiller [ Mon May 20, 2019 9:03 am ] |
| Post subject: | Re: 2015 Getaway Tiller arms - one straight, one bent |
Getaway arms are supposed to be straight coming out of the EZ LOC Housing Older boats with aluminum castings had a slight bend upwards.
|
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|