| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| Where does one buy a Wing Tension Leg? http://www.hobie.com/au/en/forums/viewtopic.php?f=23&t=65656 |
Page 1 of 1 |
| Author: | kwuog [ Wed Oct 09, 2019 1:54 pm ] |
| Post subject: | Where does one buy a Wing Tension Leg? |
The portside wing on my Getaway will not retract... the problem is that the aft support tube had been slightly bent. The bent part is the Wing Tension Leg #37091001. Can I buy this direct from Hobie or do I have to order through a dealer? Thanks! |
|
| Author: | dksailor [ Wed Oct 09, 2019 8:03 pm ] |
| Post subject: | Re: Where does one buy a Wing Tension Leg? |
When Harvey broke my wing seat off, I ordered replacement parts (including a tension leg) from backyardboats.com. Jay was very helpful and their shipping is reasonable, at least to Texas. Good luck! David |
|
| Author: | kwuog [ Wed Oct 09, 2019 10:05 pm ] |
| Post subject: | Re: Where does one buy a Wing Tension Leg? |
@Matt Miller: does Hobie sell replacement parts direct to consumers? |
|
| Author: | kwuog [ Thu Oct 10, 2019 11:36 am ] |
| Post subject: | Re: Where does one buy a Wing Tension Leg? |
I ended up just ordered through my local dealer. |
|
| Author: | mmiller [ Tue Oct 15, 2019 8:37 am ] |
| Post subject: | Re: Where does one buy a Wing Tension Leg? |
and no... no direct to consumer sales. |
|
| Author: | BillACK [ Wed Oct 16, 2019 11:08 am ] |
| Post subject: | Re: Where does one buy a Wing Tension Leg? |
The used Getaway I bought this summer had a bent outer tube. I was able to bend it back straight and a friend used a torch to heat it up and used the inner part to push out the kink. Worked great and now it extends and retracts easily! |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|