| Hobie Forums http://www.hobie.com/au/en/forums/ |
|
| A better cover idea ! http://www.hobie.com/au/en/forums/viewtopic.php?f=23&t=9305 |
Page 1 of 1 |
| Author: | pejnielsen [ Sun May 04, 2008 6:41 pm ] |
| Post subject: | A better cover idea ! |
After spending 2 hours cleaning my boat from the black scuff marks the factory cover caused I decided to figure this problem out. I have a travel trailer that I keep cover under a fitted water resistant, breathable , non scuffing cover. The cover they wanted me to but covered the walls all the way down. Because of the storage area I use I decided a cover for a high -lo trailer would offer enough coverage and be lighter and cheaper. Well they make the same one for a up to a 22 foot trailer . The wall come down around 4 to 5 feet. I cut a hole in the front to slide the mast through and it fit over the entire boat including wing and all but 3 feet of the mast. E-mail me and I will send you pictures. [email protected] |
|
| Author: | crobiecat [ Mon May 05, 2008 12:44 am ] |
| Post subject: | Re: A better cover idea ! |
pejnielsen wrote: E-mail me and I will send you pictures.
[email protected] I emailed you, the but the mail bounced back from comcast... |
|
| Author: | pejnielsen [ Mon May 05, 2008 7:40 am ] |
| Post subject: | |
I have had the same problem when I reply to some members. I will try to post the pictures tonight. |
|
| Author: | spc3897 [ Sat May 10, 2008 5:07 pm ] |
| Post subject: | |
When you get a moment, I also would love to see the photos of your Getaway cover. Thanks! |
|
| Author: | pejnielsen [ Sat May 10, 2008 7:09 pm ] |
| Post subject: | |
Sorry about the bounce back guy's, I just turned off a filter , with any luck that should help. My e-mail is [email protected]. The cover is a cover meant for a HI-Lo trailer. We took it off to sail today and there was not a new mark on the boat. No worries Paul |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|